If you see the missing grid select it right click and choose unhide in view.
Curved column line revit not seen on other floors.
See masking regions and filled regions.
Konstru will store split lines and slab shape points but represent the floor outline only.
Getting such information is not generally as easy as just getting a location curve.
To prevent the floor or slab from being visible in plan view you need to adjust the bottom clip so that it is more than 4 feet above the floor or slab and set the view depth so that it does not include any part of the floor or slab.
Ensure the link is visible in the view.
If the element is part of a linked file do the following.
A slanted column on the other hand is equipped with a location curve.
Doubly curved surfaces generated by slab shape points are not supported.
It follows the below procedure.
See override individual lines in an element.
Verify that the element is not hidden by a masking region or a filled region.
In the main floor level the bottom of the primary range is set to main floor with an offset of 1.
This is related to the auto detect settings for the column s analytical model and also the tolerances set in structural settings.
The application is working as expected and as designed however a setting change will address this.
See unload and reload linked models.
To check click the worksets icon in the collaborate tab.
If your model in place intersects the cut plane at even just one point it ll show the entire model regardless of whether or not the other parts should be seen.
When you tried to underlay a floor only doors and windows were visible.
This issue occurs because there is an incorrect view range in the main view.
For vertical columns you can derive end points via level parameters and offsets.
If you are using slabs with split lines and very steep angles you might want to model those floors as two floors using slap shape points.
Ami out of luck or is there some trick i don t know yet.
Ensure the link is loaded.
Verify that your grids workset display yes in the opened column.
Structural analytical lines are not centered on columns when grade beams are off center.
If not apologies in advance.
In plan view click view menu view properties.
Those floors will be ignored entirely.
An even more bizarre example is where a revit floor will disregard your view depth and show anyway as long as it is within an arbitrarily picked range of 4 feet of your bottom clip.
I am trying to create a gap in a curved grid line but this seems beyond revit s capabilities.
Thank you all kindly.
First post here and i hope i am in the right place.
